Brochure & SpecificationsUPS 43-44 FC
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by:
- Ceramic shaft and radial bearings.
- Carbon axial bearing.
- Stainless steel rotor can and bearing plate.
- Corrosion-resistant impeller, Composite, PES.
- Cast iron pump housing.
|
|
The motor is a 1-phase motor. No additional motor protection is required.
[anh base64 da go — pipeline that se decode roi upload len Shopify Files]
| Product name |
UPS 43-44 FC |
| Product No. |
52722515 |
| EAN |
5700834818738 |
Technical
| Speed Number |
3 |
| Max flow |
63 US gpm |
|
63 US gpm |
| Head max |
14.11 ft |
|
14.11 ft |
| Approvals on nameplate |
UL, CSA |
| Valve |
pump with built-in isolating and non-return valves |
Materials
| Pump housing |
Cast iron |
|
EN-JL1030 |
|
ASTM 30 B |
| Impeller |
Composite, PES |
Installation
| t max amb |
104 °F |
| Ambient max at 176°F liquid |
176 °F |
| Maximum operating pressure |
145.04 psi |
| Flange standard |
USA Oval |
| Type of connection |
C.I. Flange |
| Pipe connection |
2 - Bolt Flange |
| Pressure stage |
PN 10 |
| Port-to-port length |
8 1/2 in |
Liquid
| Pumped liquid |
Water |
| Liquid temperature range |
35.6 .. 230 °F |
| Selected liquid temperature |
140 °F |
| Density |
61.35 lb/ft³ |
Electrical data
| Power input in speed 1 |
0.2105 HP |
| Power input in speed 2 |
190 W |
| Max. power input |
203 W |
| Main frequency |
60 Hz |
| Rated voltage |
1 x 230 V |
| Current in speed 1 |
0.7 A |
| Current in speed 2 |
0.8 A |
| Current in speed 3 |
0.9 A |
| Capacitor size - run |
5 µF/400 V |
| Number of poles |
2 |
| Insulation class (IEC 85) |
F |
| Built-in motor protection |
CONTACT |
| Thermal protec |
internal |
