Grundfos 96402900 UPS 80-40 F B Circulator Pump

Brochure & Specificaitons 

UPS 80-40 F B
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.

In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. The pump is characterized by:

2 speed motor. Ceramic radial bearings. Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing. Bronze pump housing. Stator with built-in thermal switch.

The motor is a 3-phase motor.

The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor.

Controls:
Relay:		without relay
Terminal box position:		1.30H
Liquid:
Pumped liquid:		Water
Liquid temperature range:		14 .. 248 °F
Selected liquid temperature:		140 °F
Density:		61.35 lb/ft³
Technical:
Approvals:		CCSAUS,IAPMO
Materials:
Pump housing:		Bronze
		CuSn10
Impeller:		Stainless steel
		EN 1.4301
		AISI 304
Installation:
Range of ambient temperature:		32 .. 104 °F
Maximum operating pressure:		145.04 psi
Pipe connection standard:		ANSI
Type of connection:		DIN
Pipe connection:		GF 80
Pressure rating for connection:		PN 10
Port-to-port length:		19 in
Electrical data:
Power input in speed 2:		260 W
Max. power input:		380 W
Main frequency:		60 Hz
Rated voltage:		3 x 460 V
Current in speed 2:		0.44 A
Current in speed 3:		0.81 A
Cos phi in speed 2:		0.75
Cos phi:		0.59
Enclosure class (IEC 34-5):		X4D
Insulation class (IEC 85):		H
Ex-protection standard:		CONTACT
Winding resistance:		90.5 - 118.0 Ohm
Others:
Terminal box position:		1.30H
Net weight:		85.3 lb
Gross weight:		90.4 lb
Shipping volume:		3.46 ft³

[anh base64 da go — pipeline that se decode roi upload len Shopify Files]